This site is now closed.

All the content from here and more can be found :

 

The Last Alliance

Equipment Used Corrugated cardboard Cereal box cardboard Lichen Green flock Static grass PVA glue Black spray paint Various shades of grey paint Masking tape

 

Introduction

In this article we will build a pile of rubble blocks. This is a short guide but placed amongst the ruined walls these look very effective.

Step 1

Cut out of corrugated card four blocks of about 2cm by 1cm.

These should be glued together.

The edges should be all be covered in masking tape.

Make 3 - 4 more of these of various size.

Step 2

Cut out of corrugated card a based. This should be about 4cm by 3cm.

Step 3

Arrange and using PVA, glue the pieces onto the base. Look at the picture to see how the blocks can be piled on top of each other.

Step 4

Undercoat the whole piece, including the base in black. The blocks should be painted in various shades of grey. I started off using Shadow Grey and the dry brushed Codex Grey and finally Fortress Grey. Cover the base in PVA and then sprinkle green flock onto it. Shake of the excess. Glue some lichen in various places. If you want static grass can also be glued in places. The rubble section is now finished.

Next is an article on building a ruined tower.

Next >